METEOR STORM SERIES LED GROW LIGHT:
Full spectrum with enhanced Red and Blue light.
High efficacy is up to 2.8umol/J.
arge coverage area and uniform light distribution.
Light bar can be replaced.
Wet rating is lP65,lt means the water jet from the nozzle (6.3mm) should have no negative effect when sprayed onto the equipment casing from any angle. In fact,All our drivers and cords are covered with silicone, no bare wires are exposed to the air.
Decades research proved that the spectrum has huge:
impact on the efficiency of photosynthesis, while 430nm and 660nm is the strongest driving force for the photosynthesis of your medical plant. Base on this theory we created the V1 spectrum which has the balanced wavelength covering all the stages of your growing .
As a Grower, you may heard about Emerson Effect (if you don't , please google it .) lt's can improve the photosynthesis efficiency dramatically, especially in Flowering stage . E1 spectrum is base on this theory . Price of E1 spectrum is a little bit higher than that of V1 .
The effect of different wavelengths of light on plant photosynthesis is different.
The wavelength of light needed by plant photosynthesis is about 400-700nm. 430-450nm (blue) light and 630-660nm (red) light contributed most to photosynthesis.
Blue light can help plant photosynthesis, promote the growth of green leaves, protein synthesis and fruit formation; red light can promote the growth of plant roots and stems, help flowering and fruiting, prolong the flowering period , and increase the yield!
LED plant growth lamp is small in power but efficient , because other lights emit full spectrum, that is, there are 7 colors, and plantsneed only red and blue light, so most of the traditional light is wasted, so the efficiency is very low.
What's more,LED plant growth lights can give red and blue light that plants need, so it is very efficient.That's why LED plant growth light is better than dozens ofwatts or even hundreds of watts of power.
The traditional sodium lamp spectrum is lack of blue light, and mercury lamp and energy-saving lamp spectrum is lack of red light,so the light compensation effect of traditional lamp is much worse than that of LED lamp, and compared with traditional lamp, it can save more than 90% of electric energy and greatly reduce the operation cost.
Hot-sale in north America and Europe:
located more than 16 countries mainly in North America and Europe.they are producing high quality crops and elevated yields by using our lights. It's our honor to help them to get a satisfied yield of the medical plants . We learned a lot from growers during these 3years of LED grow light business , which make us more and more professional in making the light fixtures.
FAQ:
Q: What is your payment terms and lead time?
A: We accept T/T/, Lead time for samples is 3 working days, and for volume order is 7-10 working days.
Q: Why should I choose LED products?
A: LED has over 10 years experience in led lighting. Our led lights have outstanding structure design, and use first-class LEDs + drivers + core components. We have very strict quality management system to keep extremely low failure rate, lower than other suppliers.
Q: Can I have my company logo print on the lights?
A: Yes, we can laser print/silk print your company logo and item No. on the lights for free.
Q: How do you keep your warranty?
A: We give 5 years warranty for all lights. Within the warranty period, we can send you replacement light/accessory for free, not caused by human-made misoperation. Longer warranty such as 10 years is also negotiable in our company.
Q: Can you produce according to the samples or drawings?
A:Yes, we can produce by your samples or technical drawings. We are capable of the Mold/Die development and design, as well as the fixtures.
Q: What are your terms of payment?
A:Payment terms vary among different countries. Generally, 30% T/T in advance, 70% balance before shipment...
Q: What is the lead time?
A:Usually 7 days for samples and 15 to 35 days for bulk orders.
Q: What are your terms of packing?
A:Generally, we pack our goods in neutral cartons. we can also follow to your requirements.
Q: What are your terms of delivery?
A:We prefer to EXW QINGDAO but accept FOB etc. You can choose the one you like.
Q: How to solve the quality problems after sales?
A:Our products go through a strict quality control system before shipment, 100% full function test and 100% aging test. The failure rate is far less than 0.3%.Secondly, we offer our warranty 5 years to our products and we take full responsibility according to our wholesome after-sales support system..
Q: Do you have any MOQ limit for led light order?
A:MOQ is 100pcs and 1pc for sample checking is available.
Full spectrum with enhanced Red and Blue light.
High efficacy is up to 2.8umol/J.
arge coverage area and uniform light distribution.
Light bar can be replaced.
Wet rating is lP65,lt means the water jet from the nozzle (6.3mm) should have no negative effect when sprayed onto the equipment casing from any angle. In fact,All our drivers and cords are covered with silicone, no bare wires are exposed to the air.
Model | METEOR STROM SERIES |
PPF | 2435μmol/s |
Wattage | 660W/720W/800W/900W/1000W |
Weight | 25.52lbs/11.6kg OR 30.8lbs/14kg |
Light Source | White Chip&red chip |
Efficacy | 2.8 μmol/J |
AC Input Voltage | 120-277V AC,347-480V AC,50/60Hz |
Thermal Management | Passive Cooling |
Material | Aluminum |
Fixture Dimension | 1193*1086*175mm/ 46.97"*42.76"*6.89" |
Max.Ambient Temperature | 95°F / 35°C |
Dimming | 0-10V Dimmable |
Warranty | 5 years |
Mounting Height | ≥ 6" (15.2cm) Above Canopy |
IP Rating | IP65 |
Certifications | All Certifications |
Decades research proved that the spectrum has huge:
impact on the efficiency of photosynthesis, while 430nm and 660nm is the strongest driving force for the photosynthesis of your medical plant. Base on this theory we created the V1 spectrum which has the balanced wavelength covering all the stages of your growing .
As a Grower, you may heard about Emerson Effect (if you don't , please google it .) lt's can improve the photosynthesis efficiency dramatically, especially in Flowering stage . E1 spectrum is base on this theory . Price of E1 spectrum is a little bit higher than that of V1 .
The effect of different wavelengths of light on plant photosynthesis is different.
The wavelength of light needed by plant photosynthesis is about 400-700nm. 430-450nm (blue) light and 630-660nm (red) light contributed most to photosynthesis.
Blue light can help plant photosynthesis, promote the growth of green leaves, protein synthesis and fruit formation; red light can promote the growth of plant roots and stems, help flowering and fruiting, prolong the flowering period , and increase the yield!
LED plant growth lamp is small in power but efficient , because other lights emit full spectrum, that is, there are 7 colors, and plantsneed only red and blue light, so most of the traditional light is wasted, so the efficiency is very low.
What's more,LED plant growth lights can give red and blue light that plants need, so it is very efficient.That's why LED plant growth light is better than dozens ofwatts or even hundreds of watts of power.
The traditional sodium lamp spectrum is lack of blue light, and mercury lamp and energy-saving lamp spectrum is lack of red light,so the light compensation effect of traditional lamp is much worse than that of LED lamp, and compared with traditional lamp, it can save more than 90% of electric energy and greatly reduce the operation cost.
Hot-sale in north America and Europe:
located more than 16 countries mainly in North America and Europe.they are producing high quality crops and elevated yields by using our lights. It's our honor to help them to get a satisfied yield of the medical plants . We learned a lot from growers during these 3years of LED grow light business , which make us more and more professional in making the light fixtures.
FAQ:
Q: What is your payment terms and lead time?
A: We accept T/T/, Lead time for samples is 3 working days, and for volume order is 7-10 working days.
Q: Why should I choose LED products?
A: LED has over 10 years experience in led lighting. Our led lights have outstanding structure design, and use first-class LEDs + drivers + core components. We have very strict quality management system to keep extremely low failure rate, lower than other suppliers.
Q: Can I have my company logo print on the lights?
A: Yes, we can laser print/silk print your company logo and item No. on the lights for free.
Q: How do you keep your warranty?
A: We give 5 years warranty for all lights. Within the warranty period, we can send you replacement light/accessory for free, not caused by human-made misoperation. Longer warranty such as 10 years is also negotiable in our company.
Q: Can you produce according to the samples or drawings?
A:Yes, we can produce by your samples or technical drawings. We are capable of the Mold/Die development and design, as well as the fixtures.
Q: What are your terms of payment?
A:Payment terms vary among different countries. Generally, 30% T/T in advance, 70% balance before shipment...
Q: What is the lead time?
A:Usually 7 days for samples and 15 to 35 days for bulk orders.
Q: What are your terms of packing?
A:Generally, we pack our goods in neutral cartons. we can also follow to your requirements.
Q: What are your terms of delivery?
A:We prefer to EXW QINGDAO but accept FOB etc. You can choose the one you like.
Q: How to solve the quality problems after sales?
A:Our products go through a strict quality control system before shipment, 100% full function test and 100% aging test. The failure rate is far less than 0.3%.Secondly, we offer our warranty 5 years to our products and we take full responsibility according to our wholesome after-sales support system..
Q: Do you have any MOQ limit for led light order?
A:MOQ is 100pcs and 1pc for sample checking is available.